Myanmarorchestia nunomurai Nakano and Morino, 2018

Nakano, Takafumi, Tomikawa, Ko, Hou, Zhonge & Morino, Hiroshi, 2018, A new landhopper species of Myanmarorchestia (Crustacea: Amphipoda: Talitridae) from Yunnan, China, Journal of Natural History (J. Nat. Hist.) 52 (17 - 20), pp. 1181-1199 : 1183-1198

publication ID

https://doi.org/ 10.1080/00222933.2018.1453098

publication LSID

lsid:zoobank.org:pub:3C014FFC-F4D6-4F18-8188-33672367ABB1

persistent identifier

https://treatment.plazi.org/id/1C184115-FFF3-FFA6-FEDA-FC6CA1C99620

treatment provided by

Carolina

scientific name

Myanmarorchestia nunomurai Nakano and Morino
status

sp. nov.

Genus Myanmarorchestia Hou in Hou and Zhao, 2017 Myanmarorchestia nunomurai Nakano and Morino , sp. nov.

( Figures 2–12 View Figure 2 View Figure 3 View Figure 4 View Figure 5 View Figure 6 View Figure 7 View Figure 8 View Figure 9 View Figure 10 View Figure 11 View Figure 12 )

Type material

Holotype. Male (14.9 mm), IZCAS-I-A2591-1 ( Figures 2 View Figure 2 (a), 3), collected from Huanxipo, Tengchong, Yunnan Province, China (~ 25.17°N, ~ 98.34°E), Station #96HXP-1 (elevation 1950 m; vegetation, Pinus armandii , Lithocarpus variolosus , Quercus glauca , Rhus chinensis , and Chimonobambusa yunnanensis ), by Noboru Nunomura, on 14 October 1996.

Paratypes. In total 1 male 3 females: female (9.7 mm), IZCAS-I-A2591-2, data same as for holotype; male (13.7 mm), NSMT-Cr 25804, female (11.8 mm), NSMT-Cr 25805 ( Figure 2 View Figure 2 (b)), female (12.3 mm), IZCAS-I-A2591-3, collected from Station #96HXP-2 (elevation 1960 m; vegetation, Pinus armandii , Lithocarpus variolosus , Quercus glauca , and Rhus chinensis ), the other collection data same as for holotype.

Diagnosis

Palp of maxilla 1 1-articulate; palpal article 2 of maxilliped broad; coxa on gnathopod 1 produced proximally; dactylus of male gnathopod 2 arcuate; coxa of pereopod 4 with distinct posterior cusp; coxal gills on gnathopod 2 to pereopod 6 large, convoluted, without filamentous projections; uropod 2 sexually dimorphic, male outer ramus bearing 1 small robust seta on midlateral surface and a few rows of small teeth on middle to distodorsal surface; peduncle of uropod 3 bearing 1 long robust seta; telson with bare dorsal surface.

Description

Male [holotype, IZCAS-I-A2591-1; pereopod 7 based on paratype, NSMT-Cr 25804].

Head ( Figure 3 View Figure 3 ) with short rostrum; antennal sinus shallow, rounded; eyes oval, major axis ca. 0.3 times as long as head. Dorsal surfaces of pereonites, pleonites, and urosomites smooth ( Figure 3 View Figure 3 ). Epimeral plates 1–3 with 2, 1, 4 setae on posterior margins, respectively ( Figure 4 View Figure 4 (a–c)); posterodistal corner of epimeral plates 1 rounded, those of epimeral plates 2–3 weakly pointed.

Antenna 1 ( Figure 4 View Figure 4 (d)): 0.4 times as long as antenna 2, exceeding middle part of peduncular article 5 of antenna 2; peduncular articles 1–3 in length ratio of 1.0: 1.1: 1.2; flagellum 7-articulate, subequal to peduncle in length.

Antenna 2 ( Figure 4 View Figure 4 (e)): 0.3 times as long as body length; peduncular articles robust, article 5 longest, subequal in length to articles 3 and 4 combined; flagellum 15-articulate, length 0.8 times as long as peduncle, last article cone-shaped, forming virgula divina.

Buccal mass deep, ca. 1.2 times as high as head ( Figure 3 View Figure 3 ).

Upper lip with lateral margins bearing minute setae ( Figure 4 View Figure 4 (f)); distal margin rounded with minute-setal patch.

Mandible with left and right incisors 5- and 4-dentate, respectively ( Figure 4 View Figure 4 (g), 4(h)); left lacinia mobilis 4-dentate ( Figure 4 View Figure 4 (g)); right lacinia mobilis bifid, bearing several teeth ( Figure 4 View Figure 4 (h)); each molar process triturative, with plumose seta ( Figure 4 View Figure 4 (g), 4(h)).

Lower lip with broad outer lobes; inner lobes indistinct ( Figure 4 View Figure 4 (i)).

Maxilla 1 with inner and outer plates and palp ( Figure 4 View Figure 4 (j)); inner plate slender, apical margin of inner plate with 2 plumose setae; outer plate with 6 serrate and 3 simple robust setae, innermost apical robust seta leaning inwards; palp small, 1-articulate.

Maxilla 2 ( Figure 4 View Figure 4 (k)): inner plate with 1 long plumose seta on medial margin, apical margin with plumose and simple setae; outer plate slightly longer than inner plate, apical margin with plumose and simple setae.

Maxilliped ( Figure 5 View Figure 5 (a)): inner plate with 3 robust setae and several plumose setae on apical margin; outer plate ovate, apically rounded, with 2 plumose setae on lateroapical margin, with many simple setae on subapical margin; palp 4-articulate; palpal article 2 broad, outer margin with 3 setae, medially weakly expanded with 3 setae on inner submarginal part; palpal article 3 ovate, outer distal corner with 6 setae, apical submarginal part with 2 robust setae, inner submarginal part with more than 5 setae; palpal article 4 distinct, with 2 robust and 3 slender setae apically.

Gnathopod 1 ( Figure 5 View Figure 5 (b)): coxa produced proximally, ventral margin with 9 simple setae; anterior and posterior margins of basis with simple and robust setae, respectively; ischium quadrate, posterodistal corner with a few setae; merus with simple setae on posterior margin; carpus lacking pellucid lobe, 3.0 times as long as wide, anterior margin with few slender setae, posterior margin with simple setae, each of anterodistal and posterodistal corners with simple setae; propodus slender and simple, 0.7 times as long as carpus, 3.1 times as long as wide, anterior margin with 1 simple seta and 2 pairs of simple setae, anterodistal corner with 5 simple setae, posterior margin with 3 robust setae and 1 pair of robust setae, lateral surface with 3 submarginal robust setae; dactylus simple, 0.5 times as long as propodus, posterior margin with simple seta, hinge of unguis with 2 simple setae ( Figure 5 View Figure 5 (c)).

Gnathopod 2 ( Figure 5 View Figure 5 (d)): ventral margin of coxa with 12 simple setae, tip of posterior cusp blunt; anterior submarginal part of basis with 3 setae; ischium 0.9 times as long as merus; merus, posterodistal lobe present, its surface covered with scabrous surface; carpus 2.0 times as long as wide, developed posterodistal lobe with scabrous surface, anterodistal corner with 3 setae; propodus transitional form, weakly chelate, 1.3 times as long as carpus, 2.0 times as long as wide, anterodistal corner with 4 setae, lateral and medial surfaces with 12 and 16 slender setae, respectively, palmar margin with many simple setae, posterior lobe produced anteriorly, narrowing distally with scabrous surface ( Figure 5 View Figure 5 (e)); dactylus, arcuate, much shorter than palmar margin, each of distal tip and posterodistal margin with 1 short seta, posterior margin of base with 3 short setae ( Figure 5 View Figure 5 (e)).

Pereopods 3–7 simplidactylate ( Figures 6 View Figure 6 , 7 View Figure 7 ); propodi of pereopods 3 and 4 lacking locking robust setae ( Figure 6 View Figure 6 (b), 6(d)).

Pereopod 3 ( Figure 6 View Figure 6 (a)): coxa wider than deep, ventral margin of coxa with 9 simple setae; basis with robust setae and simple seta and robust setae on anterior and posterior margins, respectively; merus to dactylus in length ratio of 1.0: 0.8: 1.0: 0.4; posterior margin of merus with 2 and 2 pairs of simple setae and with 1 robust seta, anterodistal corner with 1 simple and 1 robust seta, posterodistal corner with 2 simple setae and 1 pair of robust setae; anterior margin of carpus with 1 pair of robust setae, anterodistal corner with 1 simple seta, posterior margin with 1 and 3 pairs of robust setae, posterodistal corner with 2 robust setae; propodus slender, anterior margin with 3 pairs of robust setae, anterodistal corner with 1 robust and 2 simple setae, posterior margin with 4 pairs of robust setae; dactylus with 2 simple setae on base ( Figure 6 View Figure 6 (b)).

Pereopod 4 ( Figure 6 View Figure 6 (c)): 0.9 times as long as pereopod 3; coxa wider than deep, ventral margin with 11 simple setae, tip of posterior cusp sharp; basis with a few and 3 robust setae on anterior and posterior margins, respectively; merus to dactylus in length ratio of 1.0: 0.9: 1.0: 0.4; anterior margin of merus with 1 robust seta, anterodistal corner with 1 simple and 1 robust setae, posterior margin with 3 simple and 1 robust setae, posterodistal corner with 2 simple and 1 robust setae; anterior margin of carpus with 1 robust seta, anterodistal corner with 1 simple seta, posterior margin with 1 and 2 pairs of robust setae, posterodistal corner with 1 pair of robust setae; anterior margin of propodus with 3 pairs of robust setae, anterodistal corner with 2 simple and 1 robust setae, posterior margin with 4 pairs of robust setae; dactylus not pinched, with 2 simple setae on base ( Figure 6 View Figure 6 (d)).

Pereopod 5 ( Figure 6 View Figure 6 (e)): almost as long as pereopod 3; coxa bilobed, ventral margin of anterior lobe straight, with 6 simple setae, posterior lobe with 1 seta; basis subovate, anterior margin with 5 robust setae, anterodistal corner with 2 robust setae, posterior margin weakly expanded, with 10 simple setae; merus to dactylus in length ratio of 1.0: 1.2: 1.4: 0.6; anterior margin of merus with 2 pairs of robust setae, anterodistal corner with 3 robust setae, posterior margin with 1 robust seta, posterodistal corner produced, rounded, with 3 robust setae; anterior margin of carpus with 3 pairs of robust setae, anterodistal corner with 1 robust seta, posterior margin with 1 pair of robust setae, posterodistal corner with 3 robust setae; propodus slender, anterior margin with 1 and 4 pairs of robust setae, anterodistal corner with locking robust seta ( Figure 6 View Figure 6 (f)), posterior margin with 3 robust setae, posterodistal corner with 2 simple and 1 robust setae; dactylus with 2 simple setae on base ( Figure 6 View Figure 6 (f)).

Pereopod 6 ( Figure 7 View Figure 7 (a)): 1.5 times as long as pereopod 3; coxa bilobed, anterior lobe subrounded without seta, anterodistal corner of posterior lobe rounded, ventral margin of posterior lobe with 2 setae; basis elliptic, anterior margin with 5 robust setae, anterodistal corner with 2 robust setae, posterior margin slightly expanded and distally weakly produced, with 10 simple setae; ischium quadrate, anterodistal corner with robust setae; merus to dactylus in length ratio of 1.0: 1.1: 1.4: 0.4, anterior margin of merus with 2 and 2 pairs of robust setae, anterodistal corner with 3 robust setae; posterior margin with 2 robust setae, posterodistal corner slightly produced, quadrate, with 3 robust setae; anterior margin of carpus with 4 pairs of robust setae and 1 robust seta, posterior margin with 2 robust setae, posterodistal corner with 3 robust setae; propodus slender, anterior margin with 5 pairs of robust setae, anterodistal corner with locking robust seta ( Figure 7 View Figure 7 (b)), posterior margin with 5 pairs of robust setae, posterodistal corner with 1 robust seta and 2 pairs of simple slender setae; dactylus with 2 simple setae on base ( Figure 7 View Figure 7 (b)).

Pereopod 7 of holotype ( Figure 7 View Figure 7 (c)): almost as long as pereopod 3; coxa subquadrate, posterodistal margin with 1 seta; basis ovate, anterior margin with 2 simple and 5 robust setae, anterodistal corner with 3 robust setae, posterior margin expanded with 9 simple setae; ischium quadrate, anterodistal corner with 2 robust setae; merus to dactylus in length ratio of 1.0: 1.1: 1.2: 0.4, anterior margin of merus with at least 2 pairs of robust setae, anterodistal corner with 2 robust setae, posterior margin without seta, posterodistal corner with 1 robust seta; anterior margin of carpus with 2 pairs of robust setae, anterodistal corner lacking locking robust setae ( Figure 7 View Figure 7 (d)), posterior margin without setae, posterodistal corner with 2 robust setae; anterior margin of propodus with 2 pairs of robust setae, posterior margin with 1 pair of robust setae, posterodistal corner with 3 simple slender setae; dactylus with 2 simple setae on base, unguis very short ( Figure 7 View Figure 7 (d)).

Pereopod 7 of paratype ( Figure 7 View Figure 7 (e)): 1.5 times as long as pereopod 3; coxa subquadrate, posterodistal margin with 1 seta; basis ovate, anterior margin with 1 simple and 6 robust setae, anterodistal corner with 3 robust setae, posterior margin expanded with 10 simple setae, posterodistally produced, exceeding distal joint of ischium; ischium quadrate, anterodistal corner with 3 robust setae; merus to dactylus in length ratio of 1.0: 1.1: 1.5: 0.4, anterior margin of merus with 3 pairs of robust setae, anterodistal corner with 3 robust setae, posterior margin with 2 robust setae, posterodistal corner slightly produced with 3 robust setae; anterior margin of carpus with 4 pairs of robust setae and 1 robust seta, posterior margin with 2 robust setae and 1 pair of robust setae, posterodistal corner quadrate with 2 robust setae; propodus slender, anterior margin with 5 pairs of robust setae, anterodistal corner with 1 locking robust seta ( Figure 7 View Figure 7 (f)), posterior margin with 5 pairs of robust setae, posterodistal corner with 1 robust seta and 2 pairs of simple slender setae; dactylus with 2 simple setae on base ( Figure 7 View Figure 7 (f)).

Coxal gills large, lobate, convoluted, those of gnathopod 2 and pereopod 3 smaller than those of pereopods 4–6 ( Figure 8 View Figure 8 ); coxal gill of gnathopod 2 consisting of at least 3 lobes, middle lobe largest ( Figure 8 View Figure 8 (a)); posterior part of coxal gill of pereopod 3 with 2 small lobes ( Figure 8 View Figure 8 (b)); anterior part of coxal gill of pereopod 4 slightly attenuated, posterior part consisting of 1 small attenuated lobe and 1 large and elongated lobe ( Figure 8 View Figure 8 (c)); coxal gill of pereopod 5 consisting of at least 3 lobes, posterior lobe largest, posterior part with slender appendage ( Figure 8 View Figure 8 (d)); coxal gill of pereopod 6 consisting of 3 lobes, middle lobe largest ( Figure 8 View Figure 8 (e)).

Pleopods each with paired retinacula on inner margin of peduncle ( Figure 9 View Figure 9 (a–f)); every ramus indistinctly articulate, with slender plumose setae ( Figure 9 View Figure 9 (a), 9(c), 9(e)). Pleopod 1 ( Figure 9 View Figure 9 (a)): peduncle bearing ~10 plumose setae on outer margin; inner ramus 1.1 times as long as peduncle; outer ramus 0.8 times as long as peduncle. Pleopod 2 ( Figure 9 View Figure 9 (c)): 1.1 times as long as pleopod 1; peduncle bearing ~14 plumose setae on outer margin; inner ramus 1.1 times as long as peduncle; outer ramus 0.7 times as long as peduncle. Pleopod 3 ( Figure 9 View Figure 9 (e)): 1.1 times as long as pleopod 1; peduncle bearing ~10 plumose setae on outer margin, and 5 simple setae on medial surface; inner ramus 1.1 times as long as peduncle; outer ramus 0.7 times as long as peduncle.

Uropod 1 ( Figure 9 View Figure 9 (g)): peduncle with 2–3 robust plus 1–2 simple short, and 4 robust setae on inner and outer margins, respectively, inner distal corner with robust seta, outer distolateral robust seta 0.4 times as long as outer ramus; inner ramus 0.7 times as long as peduncle, inner margin with 4 robust setae, outer margin without setae, apical part with 4 robust setae; outer ramus 0.9 times as long as inner ramus, inner and outer margins without setae, apical part with 3–4 robust setae.

Uropod 2 ( Figure 9 View Figure 9 (h)): 0.6 times as long as uropod 1; peduncle with 2 and 4 robust setae on inner and outer margins, respectively, outer distal corner with robust seta; inner ramus subequal to peduncle in length, with 5 robust setae on inner margin, outer margin bare, apical part with 5 robust setae; outer ramus 0.8 times as long as inner ramus, distal part sinuate and narrowing sharply, bearing 1 small robust seta on midlateral surface and a few rows of small teeth on middle to distal-dorsal surface ( Figure 9 View Figure 9 (i)).

Uropod 3 subequal to telson in length ( Figure 9 View Figure 9 (j)); peduncle with long robust seta, and a few simple setae on dorsal margin and medial surface; ramus 0.5 times as long as peduncle, with 2 slender and 1 robust setae apically.

Telson rhombic, longer than width, slightly cleft apically, medial suture on apical dorsal surface, 0.3 times as long as telson, with 1 apical robust seta per lobe ( Figure 9 View Figure 9 (k)).

Female [paratype, NSMT-Cr 25805]. Antenna 1 ( Figure 10 View Figure 10 (a)): 0.4 times as long as antenna 2, exceeding middle part of peduncular article 5 of antenna 2; peduncular articles in length ratio of 1.0: 0.9: 1.0; flagellum 7-articulate, 0.8 times as long as peduncle.

Antenna 2 ( Figure 10 View Figure 10 (b)): 0.3 times as long as body length: peduncular articles robust, article 5 longest, subequal in length to articles 3 and 4 combined; flagellum 13-articles, length 0.8 times as long as peduncle, last article cone-shaped, forming virgula divina.

Buccal mass deep, height ca. 1.0 times as high as head.

Gnathopod 1 ( Figure 10 View Figure 10 (c)): ventral margin of coxa with 9 simple setae; anterior and posterior margins of basis with simple and robust setae, respectively; ischium quadrate, posterodistal corner with 3 simple setae; merus with simple setae on posterior margin; carpus lacking pellucid lobe, 2.9 times as long as wide, anterior margin with a few slender setae, posterior margin with simple setae, each of anterodistal and posterodistal corners with simple setae; propodus slender and simple, 0.7 times as long as carpus, 3.0 times as long as wide, anterior margin with 1 simple seta and 2 pairs of simple setae, anterodistal corner with 2 pairs of simple setae, posterior margin with 3 robust setae and 1 simple seta, lateral surface with 2 submarginal robust setae; dactylus simple, 0.4 times as long as propodus, posterior margin with simple seta, hinge of unguis with 3 simple setae ( Figure 10 View Figure 10 (d)).

Gnathopod 2 ( Figure 10 View Figure 10 (e)): ventral margin of coxa with 13 simple setae, posterior cusp indistinct; anterior margin of basis with a few simple setae; ischium 0.9 times as long as merus; merus, posterodistal lobe present with scabrous surface; carpus 2.6 times as long as wide, developed posterodistal lobe with scabrous surface, anterodistal corner with 3 setae; propodus mitten-shaped, anterior margin parallel to posterior margin, 1.1 times as long as carpus, 3.6 times as long as wide, anterodistal corner with 6 simple setae, lateral and medial surfaces with more than 15 and more than 20 simple setae, respectively, posterior lobe produced, bearing scabrous surface ( Figure 10 View Figure 10 (f)); dactylus much shorter than palmar margin, posterior margin with 2 simple setae ( Figure 10 View Figure 10 (f)).

Oostegites on gnathopod 2 to pereopod 5, slender, with constant width in distal direction ( Figure 11 View Figure 11 (a–d)); oostegite of pereopod 4 longest ( Figure 11 View Figure 11 (c)); oostegite of pereopod 5 broadest ( Figure 11 View Figure 11 (d)).

Uropod 2 ( Figure 11 View Figure 11 (e)): 0.6 times as long as uropod 1; peduncle with 1 and 3 robust setae on inner and outer margins, respectively, outer distal corner with robust seta; inner ramus subequal to peduncle in length, with 3 robust setae on inner margin, outer margin bare, apical part with 5 robust setae; outer ramus 0.9 times as long as inner ramus, inner and outer margins without setae, apical part with 4 robust setae.

Uropod 3 ( Figure 11 View Figure 11 (f)): 0.7 times as long as telson; peduncle with long robust seta, and a few simple setae on dorsal margin and medial surface; ramus 0.5 times as long as peduncle, with 1 slender simple and 1 robust setae apically.

Variation

Epimeral plates 2 and 3 with 3 and 3–4 setae on posterior margins, respectively. Antenna 1 flagellum 5–7-articulate. Antenna 2 flagellum 10–14-articulate. Buccal mass ca. 0.8–1.2 times as high as head. Maxilliped palpal article 2 with 2–3 setae on outer margin, with 3–5 setae on inner submarginal part. Pereopod 6: anterodistal corner of posterior lobe of coxa subquadrate, ventral margin of posterior lobe of coxa with 3–5 setae. Each peduncle of pleopods 1–3 bearing 8–12, 10–15, and 7–12 plumose setae on outer margins, respectively; peduncle of pleopod 3 with 4–6 simple setae on medial surface. Uropod 1 peduncle with 2–4 robust plus 1–2 simple short, and 4 robust setae on inner and outer margins, respectively; inner ramus with 3–4 robust setae on inner margin. Male uropod 2 peduncle with 2 and 3 robust setae on inner and outer margins, respectively; inner ramus with 4 robust setae on inner margin. Female uropod 2 peduncle with 1 and 2–3 robust setae on inner and outer margins, respectively; inner ramus with 2–3 robust setae on inner margin. Telson: medial suture on apical dorsal surface, 0.2–0.4 times as long as telson.

SEM observation

Scanning electron micrographs of gnathopods 1 and 2 of the respective male and female paratypes revealed that each of the posterodistal lobes of the merus ( Figure 12 View Figure 12 (a), 12(d)) and carpus ( Figure 12 View Figure 12 (b), 12(e)) as well as the posterior lobe of the propodus of gnathopod 2 ( Figure 12 View Figure 12 (c), 12(f)) are covered with palmate setae in both specimens. Their gnathopods 1 do not bear palmate setae.

Natural history

This species was found from leaf litter on the forest floor, not on the banks of streams or swamps (N. Nunomura, personal communication). The vegetation of the two collection sites was basically the same (see above), and represented a mixed mesophytic forest.

Etymology

The specific name is a noun in the genitive case formed directly from the name of Mr Noboru Nunomura, who provided valuable specimens of this species.

Remarks

The holotype possesses the undeveloped and short pereopods 7 on both sides ( Figure 7 View Figure 7 (c)). The merus to propodus of each pereopod 7 lack robust setae on the respective posterior margins. Although the merus to propodus bears robust setae on the respective anterior margins, the setae are shorter than those of pereopod 7 of the male paratype ( Figure 7 View Figure 7 (e)) as well as the female paratypes. Moreover, the holotype lacks a locking robust seta on the anterodistal corner of the propodus of pereopod 7 with a quite short dactylus compared with the other specimens. Accordingly, it is highly possible that the holotype bears the regenerated or deformed pereopods 7; at least the merus to dactylus of pereopod 7 shows undeveloped features.

In addition to the simplidactylate pereopods 3–7, the present talitrids clearly belong to Myanmarorchestia by the possession of the following characteristics defined by taxonomic studies ( Hou and Zhao 2017; Zheng and Hou 2017): antenna 2 ca. 0.3 times as long as body length; left lacinia mobilis of mandible 4-dentate; maxilliped palp 4-articulate, palpal article 4 distinct bearing setae apically; gnathopod 1 of both sexes simple; gnathopod 2 sexually dimorphic, male propodus chelate and its posterior lobe produced anteriorly with scabrous surface, female propodus mitten-shaped with scabrous surface, each merus and carpus bearing posterodistal lobe with a scabrous surface in both sexes; coxal gills on gnathopod 2 to pereopod 6, large, lobate, convoluted; oostegites on gnathopod 2 to pereopod 5, generally slender; each ventral margin of epimeral plates 1–3 lacking slits; pleopods 1–3 well developed, all pleopods almost same in length, outer margins of peduncles of every pleopods bearing plumose setae; peduncle of uropod 1 with large outer distolateral robust seta, outer ramus with bare margins; ramus of uropod 3 shorter than peduncle; telson distally subtriangular shaped, slightly cleft apically with 1 (rarely 2) apical robust seta per lobe.

The elongate antenna 1 reaching the middle part of the peduncular article 5 of antenna 2, the four-articulate maxilliped palp and the well-developed pleopods 1–3 of M. nunomurai obviously reject the possibility that this species belongs to Solitroides , which is the other high-montane landhopper genus indigenous to Indochina ( Suzuki et al. 2017); the Solitroides species possesses the shorter antenna 1 reaching the distal part of the peduncular article 4 of antenna 2, the maxilliped palp of its article 4 coalescing with article 3, and the pleopod 3 that is wider and shorter than the other pleopods.

Myanmarorchestia nunomurai can be distinguished from M. peterjaegeri by the following characteristics ( Hou and Zhao 2017): palp of maxilla 1 1-articulate (palp with small second article in M. peterjaegeri ); coxal gills without filamentous projections (all coxal gills bearing filamentous projections); and telson with bare dorsal surface (dorsal surface notched). Additionally, male individuals of the present new species are distinguishable from males of M. peterjaegeri by the arcuate dactylus of gnathopod 2 (slightly curved), and the sexually dimorphic uropod 2, of which the distal part of the outer ramus is sinuate and narrowing sharply bearing a few rows of small teeth (without sexual dimorphism; distal part of outer ramus bearing robust setae).

The recently described M. seabri and M. victoria share the 1-articulate palp of maxilla 1, sexually dimorphic uropod 2, and the dorsally bare telson, although some males of M. seabri did not exhibit dimorphism in uropod 2 ( Hou and Zhao 2017; Zheng and Hou 2017). Myanmarorchestia nunomurai differs from these two species by the following combination of the characteristics: palpal article 2 of maxilliped broad (narrow in M. victoria ); coxa of gnathopod 1 produced proximally (anterior margin not produced in M. victoria ); distinct posterior cusp of coxa of pereopod 4 (posterior cusp present, but undeveloped in M. victoria ); all coxal gills on gnathopod 2 to pereopod 6 without filamentous projections (coxal gills on gnathopod 2 to pereopod 5 bearing filamentous projections in M. seabri ; only coxal gill on gnathopod 2 with filamentous projections in M. victoria ); and peduncle of uropod 3 bearing one long robust seta (two setae in M. seabri ). While M. nunomurai possesses the sexually dimorphic uropod 2, the outer ramus of uropod 2 in the male of this new species bears a small robust seta on midlateral surface and a few rows of small teeth on the middle to distodorsal surface (a small robust seta on interior side along with small teeth only on distal surface in both M. seabri and M. victoria ).

Although no DNA sequences, e.g. mitochondrial cytochrome c oxidase subunit I, have been determined for M. nunomurai , the aforementioned morphological traits of the new species clearly demonstrate its taxonomic status as being the fourth species of Myanmarorchestia . This is the first record of the landhopper genus Myanmarorchestia from a region other than Mt. Victoria of the Arakan Mountains. DNA sequences of M. nunomurai should be assessed based on the newly collected specimens in a future study. Additionally, inventory surveys and systematic studies of landhopper talitrids inhabiting high-montane regions in Indochina as well as southern China are essential to clarify the species diversity and evolutionary history of these amphipods.

Key to species of Myanmarorchestia

1. Coxal gills on gnathopod 2 to pereopod 6 without filamentous projections ................................................. Myanmarorchestia nunomurai Nakano and Morino , sp. nov All/some coxal gills on gnathopod 2 to pereopod 6 with filamentous projections 2

2. Palp of maxilla 1 with small second article; telson with small notches on dorsal surface .................................. Myanmarorchestia peterjaegeri Hou in Hou and Zhao, 2017 Palp of maxilla 1 1-articulate; telson with bare dorsal surface ........................................ 3

3. Article 2 of maxilliped palp broad; peduncle of uropod 3 bearing 2 long robust setae .............................. .............................. Myanmarorchestia seabri Hou in Hou and Zhao, 2017 Article 2 of maxilliped palp narrow; peduncle of uropod 3 bearing 1 long robust seta ........................... ........................... Myanmarorchestia victoria Hou in Zheng and Hou, 2017

Darwin Core Archive (for parent article) View in SIBiLS Plain XML RDF