Saccharoscaptus laminifer (Dechambre, 1979)

Morón, Miguel Ángel, 2017, Description of the third instar larva of Saccharoscaptus laminifer (Dechambre) (Coleoptera: Melolonthidae: Dynastinae), Revista Brasileira de Entomologia 61 (4), pp. 354-358 : 355-357

Saccharoscaptus laminifer (Dechambre, 1979) . Third-instar larva

( Figs. 1–14 )

Head ( Fig. 1 ): Width of head capsule 7.0– 7.3 mm. Surface reddish brown, moderately rugo-punctate. Frontal suture and clypeofrontal suture distinct. Frons ( Fig. 1 ): with 2 exterior frontal seta and 1 posterior frontal seta on each side; each anterior angle of frons with 1 seta, and anterior frontal setae absent; remaining cranial surface with 3–5 dorso-epicranial setae, 4–6 epicranial setae, 4–6 para-ocellar setae on each side. Ocelli absent. Clypeus: Form trapezoidal, with 2 lateral setae at each side, without central setae. Surface of postclypeus reddish-brown, well sclerotized and rugo-punctuate; surface of preclypeus light brown. Labrum rugo-punctate, slightly asymmetrical, 2 posterior setae, 3–4 lateral setae on each side and 2 central setae. Epipharynx ( Fig. 2 ): form suboval, wider than long, asymmetrical, both lateral edges rounded. Haptomeral process of epipharynx prominent and entire; right chaetoparia with 45–50 stout setae; left chaetoparia with 30–35 stout setae, without sensillae; gymnoparia wide, with some scattered slender, small setae; acroparia with 8–10 straight, long, thick setae; rigth acanthoparia with 12–14 short, curved, spine-like setae; left acanthoparia with 10–11 short, curved, spine-like setae; pedium wide, elongate. Dexiotorma narrow and sinuose; laeotorma narrow, straight, shorter than dexiotorma; epitorma curvate toward center of pedium; pternotorma rounded. Dexiophoba absent; laephoba clearly developed between haptolechus and inner side of laeotorma, formed by 12–16 long slender fimbriae. Sclerotized plate of right nesium, nearly fused with dexiotorma, triangular, with acute apex; sense cone on left nesium represented by longitudinal, slightly curved, well-sclerotized plate, apex with 3–4 sensilla scarcely defined. Crepis well-marked. Right mandible ( Fig. 3 ): scissorial area with, rounded apical tooth (S 1 + S 2) and 1 rounded tooth (S 3) after scissorial notch weakly defined; scrobe with 3–4 stout setae. Dorsal surface with row of 7–8 slender, long setae. Ventral surface with elongate-oval stridulatory area formed by 14–16 narrowly separated ridges; ventral process well-developed, curved, rounded. Brustia with 2–3 stout, long setae. Calx large, 2 basolateral setae. Molar area with 3 wide, convex, ridged lobes (M 1 - 3) without setae. Left mandible ( Fig. 4 ) Scissorial region with 3 teeth; teeth 1 and 2 vaguely separated from tooth 3 by scissorial notch. Scrobe with 5–6 slender, long setae. Dorsal surface with row of 7–9 slender, long setae; acia well-developed, triangular, and apical setae absent, 11–12 basolateral setae. Ventral surface with elongate-oval stridulatory area formed by 15–17 narrowly separated ridges; ventral process well-developed, rounded; dorsomolar area with row of 6 slender, moderately long setae; brustia with 4–5 stout, short setae. Molar area with 2 lobes, first molar lobe (M 1) large, obliquely truncate. Maxilla ( Fig. 8 ). Cardo subrectangular. Stipes larger than wide. Galea with many stout setae and 1 well-developed uncus at apex. Lacinia with many stout setae and apical transverse row of 3 unci (middle uncus shorter than others), basally fused ( Fig. 8a ). Maxillary palpus 4- segmented, segment 4 as long as segment 2. Stridulatory area with 7 blunt, truncate rigdes and anterior truncate process ( Figs. 7–8 ). Hypopharynx ( Fig. 8 ). Glosa with 20–55 slender, long setae and 14–18 short setae. Hypopharyngeal sclerome asymmetrical, concave medially, dentiform process produced dorsally with rounded apex; left lateral lobe without setae; right lateral lobe with 4 slender, moderaterly long setae. Left margin with row of 10–12 moderately long fimbriae directed toward center of sclerome and row of 5–6 fimbria on right margin. Antenna: with 4 antennomeres, 1 to 3 nearly with same length each to other; apical antennomere twice long than antennomere 1. Apical antennomere nearly oval in dorsal or ventral view; dorsal surface with 6–8 sensory spots ( Fig. 5 ); ventral surface with 4–5 sensory spots ( Fig. 6 ).

Thorax ( Fig. 13 ): Pronotal sclerome wide, irregularly and weakly sclerotized, with 4–5 slender, long setae. Prothoracic spiracle ( Fig. 9 ) 0.25 mm long, 0.20 mm wide; respiratory plate reddish brown, regularly shaped as a closed “C”, bulla slightly prominent, convex; distance between respiratory lobes much less than diameter of bulla; plate with 25–30 microholes across diameter at middle, holes with irregular edges (400×). Dorsum of prothorax with 3–4 irregular transverse rows of 24–38 long, slender setae, without spiniform setae. Mesoprescutum with transverse, irregular rows of 16–22 long, slender setae; mesoscutellum with transverse rows of 14–18 long, slender setae. Metaprescutum with irregular rows of 26–34 long, slender setae; metaescutellum with rows of 18–22 long, slender setae. Legs: Tarsal claws with enlarged apical process, 1 basoexternal seta, and 1 internal, preapical seta ( Fig. 10 ). Tarsal claw on mesothoracic leg slightly longer than those of prothoracic leg ( Fig. 11 ). Tarsal claw of metathoracic leg shorter than claws of precedent legs ( Fig. 12 ). Coxa, trochanter, and tibiotarsus of all legs with many slender setae.

Abdomen ( Fig. 13 ): abdominal spiracles I–IV 2.5 mm long and 2.0 mm wide. Spiracles on segments V–VI equal in size (2.3 mm long and 1.9 mm wide); spiracle on segment VII slightly smaller than preceding (2.2 mm long and 2.0 mm wide) and spiracle on segment VIII smaller than all preceding (1.8 mm long and 1.8 mm wide). Abdominal segment I on prescutum with irregular transverse rows of 10–14 long, slender setae and 20–26 short, spiniform setae; subscutum with 10–12 long, slender setae, without spiniform setae; scutum with about 38–44 short, spiniform setae and 18–20 long, slender setae; scutellum with about 10–14 short, spiniform setae and 26–34 long, slender setae. All spiracular areas with 14–16 long, slender setae. Abdominal segments II–VI on prescutum with irregular rows of 14 long, slender setae and 28 short, spiniform setae; subscutum with 14–16 long setae, without short setae; scutum with 30–32 long, slender setae and 24–28 short, spiniform setae; scutellum with 16–18 long, slender setae and 50–54 short, spiniform setae. Abdominal segment VII with 1 transverse row of 22–26 slender, long setae and 40–48 short, spiniform setae mixed. Abdominal segment VIII with irregular transverse rows of 18–20 slender, long setae, without spiniform setae. Abdominal segment IX with 2 irregular rows of 10–12 slender, long setae, without spiniform setae. Abdominal segment X with approximately 40–48 moderate to long, slender setae. Pleural lobes with 18–24 long, slender setae. Raster: without palidia ( Fig. 14 ) campus with 6 slen- der, long setae; teges formed with 64–72 short setae, barbula with 14–18 long, slender setae. Anal slit widely curve, transverse. Lower anal lip with 80–94 stout, short and medium size setae on disk, and 76–84 stout, long setae along distal border. Upper anal lip with 90–110 stout, short and medium size setae. Approximate dorsal body length 38–52 mm.

Remarks. The following characters will separate the larvae of S. laminifer from those of all other known American Dynastinae: anterior frontal setae absent; external frontal setae present; posterior frontal setae present; clypeus without central setae; last antennomere with 6–8 dorsal sensory spots; ocelli absent; respiratory plates of abdominal segments V–VIII progressively smaller; raster without septula or palidia; lower anal lip with numerous stout setae, including long setae that form a fringe along the distal border.

Studied specimens. Ten third-instar larvae as part of a large sample of larvae reared to adult stage, collected in Bolivia, Santa Cruz, Warnes, La Jupia , 308 m, 10-VII-2011, F. Copa Bazán ( IIAV, IEXA) .

Distribution. This species is found in southern Brazil and eastern Bolivia ( Morón and Grossi, 2015).

Biology. S. laminifer is a yearly cycle species. Larvae live in rich organic matter soils, and during four months may feed on the roots of sugarcane cultures. In Santa Cruz, Bolivia, oviposition occurs between December and March, first instar larvae hatch in February–March, second instar larvae are growing from March to May, and third instar larvae are active from May to July; the complete larval development lasts 130–158 days. Inside a cell build with soil particles compacted with its own fecal remains, prepupa requires 5–8 days and pupa another 21–31 days. When the adult is formed it remains inside the cell for 3–4 months. The male and female emergence and mating occurs between November and December ( Copa-Bazan and Morón, 2014).

Probably , the very large numbers of larvae observed in the sugarcane fields of Santa Cruz, Bolivia during 2011 (150– 200 larvae /m 2) represent the unusual growth of populations of white grubs derived from some combination of facts, such as, scarce local rains, frequent fires in grasslands and sugarcane fields, use of compost as fertilizer, deforestation of surrounding lands and abuse of insecticides applied to soil during many years ( Copa-Bazan and Morón, 2014). The most interesting observation is that this species known for near a century from the holotype, unexpectedly appears in thousands in an agricultural landscape .

Figures

Figs. 1–12. Third instar of Saccharoscaptus laminifer. 1, head, frontal view. 2, epipharynx. Mandibles, ventral view: 3, right. 4, left. Last antennomere: 5, dorsal. 6, ventral. 7, detail, maxillary stridulatory teeth, lateral view. 8, labium, hypopharynx and right maxilla, dorsal view. 8a, detail, unci at apex of lacinia, mesial view. 9, prothoracic respiratory plate. 10, protarsal claw. 11, mesotarsal claw. 12, metatarsal claw.

Figs. 13–14. Third instar of Saccharoscaptus laminifer. 13, lateral view of living larva. 14, raster, ventral view.