Aliculastrum parallelum ( Gould, 1846 )
publication ID |
https://doi.org/ 10.11646/zootaxa.3794.3.3 |
publication LSID |
lsid:zoobank.org:pub:A9A30A4F-D095-47EE-9120-B0B5A7BCCE88 |
DOI |
https://doi.org/10.5281/zenodo.5082790 |
persistent identifier |
https://treatment.plazi.org/id/039387C8-FF81-A267-FF78-FECEFD946835 |
treatment provided by |
Felipe |
scientific name |
Aliculastrum parallelum ( Gould, 1846 ) |
status |
|
Aliculastrum parallelum ( Gould, 1846)
Bulla parallela Gould, 1846: 98 . Gould 1847: 251. Gould 1852: 220, pl. 15, figs 267, 267a (type lost; USNM 19091). Cylichna parallela View in CoL — Adams 1862: 152.
Atys parallela — Sowerby 1870: pl. 4, sp. 21a–c. Watson 1886: 640.
Atys parallelus — Martens & Langkavel 1871: 53.
Atys (Alicula) parallela — Pilsbry 1895: 266, pl.28, figs 21, 22. Kobelt 1896: 21, pl. 6, figs 13, 14.
Atys (Aliculastrum) parallela — Pilsbry 1896: 237.
Aliculastrum parallela — Carlson & Hoff 2003: 281.
Type locality. West Pacific (Not specified in the original description) .
Material examined. Mariana Islands, Guam, 4 spcs dissected, UF 374138, H = 6.8–9.6 mm.
Animal ( Fig. 1C View FIGURE 1 ): Body whitish-translucent, white dots scattered over the body, more dense at pallial lobe edge and ventral areas of parapodial lobes, white blotches scattered over cephalic shield; between eyes, edges of cephalic and parapodial lobes with darker pigmentation; red blotches scattered on the mantle; eyes visible.
Shell ( Figs 2D View FIGURE 2 , 8A, B View FIGURE 8 ): Maximum height 12.5 mm; milky white; thick, robust, semi-opaque, cylindrical, both sides of body whorl nearly parallel, rounded anteriorly and conical posteriorly, apex imperforate; spire sunken, aperture narrow, widening towards posterior edge, outer lip elevated above the apex; spiral grooves at both ends only (anterior = 17–18, posterior = 14–20), fine longitudinal growth lines present throughout shell; orangecoloured periostracum observed.
Jaws: Present, crescent shape.
Radula ( Figs 8C, D View FIGURE 8 ): Radular formula at mid-point 27 x 12.1.1.0.12; median tooth with broad base, triangular central cusp with thinner membrane-like structure on both sides, central cusp becomes more pointed posteriorly, pseudo-triangular cusp on both sides; inner lateral tooth presents only at right side, hook-shaped, broader base compared to outer lateral teeth, with semi-circular projection outwardly, broader than outer lateral teeth, strong denticulation along outer margin; outer lateral teeth hook-shaped, slender, with semi-circular projection outwardly, groove along the outer margin, size decreases outwardly.
Gizzard plates ( Figs 8E, F View FIGURE 8 ): Three gizzard plates; broader at anterior part, narrower towards posterior end; 8–9 ridges, covered by tiny rods with pointed tips at both anterior and posterior sides, density of rods higher at anterior half of gizzard plate; posterior half of gizzard plate lacks rods on posterior side of ridges.
Male reproductive system ( Fig. 8G View FIGURE 8 ): Total length 3.4 mm (H = 8.54 mm). Formed by three parts: prostate, seminal ducts and penial region; prostate elongated, semi-translucent, faint striations at distal end, division into lobes not evident; two seminal ducts, first seminal duct whitish, narrower than second seminal duct, connects distally at a pouch close to prostate and proximally close to penial sheath, coils around second seminal duct, second seminal duct yellowish, broad, proximal part of both ducts semi-translucent; penial region elongated, semitranslucent.
Ecology. There is hardly any record on the habitat for this species. Materials examined were sampled on shallow areas up to 18 m depth.
Geographical distribution. Japan, Guam, Fiji, Tahiti ( Adams, 1862; Martens & Langkavel, 1871; Watson, 1886; present study).
Remarks. Aliculastrum parallelum was originally ascribed to the genus Bulla , but from very early on, authors like Sowerby (1870), Martens & Langkavel (1871), and Watson (1886) consider this species to belong on the genus Atys ; later Pilsbry (1921) and Habe (1952) included it in the genus Aliculastrum .
Adams (1862), apparently unaware of Gould (1846) ’s work, described a similar species as Cylichna parallela , which was collected in Tsushima, Japan (Strait of Korea; as Tsu-Sima). Comparison of the original descriptions revealed that these two species are identical and likely synonyms ( Gould, 1846; Adams, 1862).
Aliculastrum parallelum does not have an ovoid inflated shell as the type species of the genus Atys ( Atys naucum ); moreover, the gizzard plates are also different from those of A. naucum with presence of few broad ridges ( Carlson & Hoff 1999). On the other hand, Aliculastrum parallelum shares similarities with the other studied species of Aliculastrum by possessing a cylindrical robust shell, and, as in the species Aliculastrum debilis , an asymmetric radula with strongly denticulated inner lateral teeth and a male reproductive system with two seminal ducts. Moreover, preliminary phylogenetic data ( Too 2011) suggest the inclusion of this species in a clade together with the other two species of Aliculastrum .
UF |
Florida Museum of Natural History- Zoology, Paleontology and Paleobotany |
No known copyright restrictions apply. See Agosti, D., Egloff, W., 2009. Taxonomic information exchange and copyright: the Plazi approach. BMC Research Notes 2009, 2:53 for further explanation.
Kingdom |
|
Phylum |
|
Class |
|
Order |
|
Family |
|
Genus |
Aliculastrum parallelum ( Gould, 1846 )
Too, Chin Chin, Carlson, Clay, Hoff, Patty Jo & Malaquias, Manuel António E. 2014 |
Aliculastrum parallela
Carlson, C. & Hoff, P. J. 2003: 281 |
Atys (Aliculastrum) parallela
Pilsbry, H. A. 1896: 237 |
Atys (Alicula) parallela
Kobelt, W. 1896: 21 |
Pilsbry, H. A. 1895: 266 |
Atys parallela
Watson, R. B. 1886: 640 |
Atys parallelus
Martens, E. & Langkavel, B. 1871: 53 |
Bulla parallela
Adams, A. 1862: 152 |
Gould, A. A. 1852: 220 |
Gould, A. A. 1847: 251 |
Gould, A. A. 1846: 98 |