Zenkevitchia karamani, Sidorov, 2016

Sidorov, Dmitry A., 2016, Zenkevitchia karamani, a distinct new species of admirabilis-group (Crustacea: Amphipoda: Typhlogammaridae) from Abkhazia, Ecologica Montenegrina 9, pp. 21-30 : 22-28

publication ID

https://doi.org/ 10.37828/em.2016.9.4

publication LSID

urn:lsid:zoobank.org:pub:8DC7E252-34EF-4FFC-8066-0C63320C8D59

DOI

https://doi.org/10.5281/zenodo.8033397

persistent identifier

https://treatment.plazi.org/id/7D816E4F-7485-47AD-9366-90A075FE8E66

taxon LSID

lsid:zoobank.org:act:7D816E4F-7485-47AD-9366-90A075FE8E66

treatment provided by

Felipe

scientific name

Zenkevitchia karamani
status

sp. nov.

Zenkevitchia karamani View in CoL , sp. n.

Figures 1-5 View Figure 1 View Figure 2 View Figure 3 View Figure 4 View Figure 5

syn.: Zenkevitchia admirabilis Birstein, 1940 : Birstein, Ljovuschkin, 1970, p. 1474, fig. 1. — Anopogammarus sp. Vinarsky et al., 2014, p. 2248.

Material examined: Holotype specimen ( X45055 View Materials /Cr-1824- FEFU): adult male, 16.0 mm, from (type locality) Novy Afon cave , 43.09065, 40.810008, Anatolia lake, Gudauta District of Abkhazia, Western Caucasus, 05.Feb.2015, coll. M. Bizin, V. Marinsky; 3 paratype specimens ( X45055 View Materials /Cr-1825-27- FEFU): 14.0 mm, female (carrying 6 eggs), 10.5 mm, female (oostegites undeveloped), 10.0 mm, female (oostegites weakly developed, non-setose); GoogleMaps paratypes with same data as holotype. GoogleMaps

Other specimens examined from the same cave locality (not included in the type series): 11.0 mm, male in Bezimjnnoe lake , 05.Feb.2015, coll. M. Bizin, V. Marinsky; 9.0 mm, female (oostegites weakly developed, non-setose), 12.0 mm, male in Goluboe lake, 06.Feb.2015, coll. R. Borisov. Deposited in the research collection of D.A. Sidorov in the Institute of Biology and Soil Science, Vladivostok (1-11/sd03- IBSS), Russia .

Diagnosis (both sexes): Robust and stout, large-sized species of gammarid-like habitus. Sexual dimorphism weakly pronounced, i.e., males usually larger than females, both gnathopods and uropod 3 sexually dimorphic. Antenna 1 long, reaching 55-60% length of body; antenna 2 reaching about 60% length of antenna 1, gland cone relatively long. Maxilla 1 inner plate triangular, with 35–37 plumose setae, outer plate of filtration-type with about 200 multi-toothed sickle-shaped comb-like spines; palps symmetrical and reduced. Mandibular palp article 3 with 2 A-groups of setae. Gnathopods 1–2 small, with propodus not larger than corresponding coxa; palmar angle of male gnathopod 2 well-defined (with 2 mid- palmar spines in the place where tip of nail close); dactyli with 1 seta each along outer margin, nails short. Urosomite 2 with medial group of spines. Pleopods 1–3 with 2 coupling setae (retinacula). Male uropod 3 long, 0.17× longer than uropod 2, endopodite small, 0.5× shorter than exopodite, both rami densely setose with bundles of long setae. Telson with 2 or 3 distal spines per lobe. Coxal gill 7 smallest, stalk relatively long. Body length 9.0– 14.0 mm (♀♀), 11.0–16.0 (♂♂).

Description. Holotype ( X45055 View Materials /Cr-1824-FEFU): male, body length 16.0 mm. General body morphology (figs 2A, B, F, J). Body smooth, lacking dorsal cuticular elements (keel or tubercles). Head as long as first pereon segment; lack rostrum; inferior antennal sinus shallow, sub-rounded. Eyes absent. Pleonites 1–3 and urosomite 1 with median and lateral groups of thin setae. Urosomites 2 and 3 on dorsal surface with lateral groups of spines. Epimeral plate 1: postero-ventral corner acuminate; posterior and ventral margins convex; 6 thin setae along ventral margin, 6 setae along posterior margin. Epimeral plate 2: postero-ventral corner acuminate; posterior margin concave; ventral margin convex; 5 notched spines along ventral margin in two rows, 6 setae along posterior margin. Epimeral plate 3: postero-ventral corner acuminate; posterior margin slightly concave; ventral margin convex; 6 notched spines along ventral margin, 9 setae along posterior margin. Telson width: length ratio is 1: 0.83; cleft 0.9 of length; 2 sub-apical spines per lobe present, these are 0.30× telson length, each accompanied by 2 setae. Antennae (figs 2A, 4A, B). Antenna 1 0.60× of body length; flagellum with up to 42 articles; each article with 3–6 short setae; peduncular articles in ratio 1: 0.9: 0.6; proximal article of peduncle distally with 2 medial sets of short setae; accessory flagellum 5-articulated. Length ratio antenna 1: 2 as 1: 0.6; flagellum of antenna 2 with 16 articles, each article densely setose; peduncle article 4 as long as article 5; flagellum slightly longer than peduncle (articles 4+5); peduncular article 4 with dense cluster of long stiff setae distally; gland cone moderately long, reaching peduncle segment 4. Mouth parts, typical gammarid, except for unusual filtration-type maxilla 1 and right mandible (figs 4C-I). Labrum rounded, clypeus detached, rounded. Inner lobes of labium absent, outer lobes broad with stiff curved setae marginally, mandibular process distinct (narrow). Left mandible: incisor with 5 teeth, lacinia mobilis with 4 teeth; between lacinia and molar row of 6 serrate spines. Right mandible: incisor process with 4 teeth, lacinia mobilis bifurcate with several long denticles, between lacinia and molar a row of 6 serrate spines, one of them modified; triturative molar process without seta. Mandibular palp article 2 0.35× longer than article 3 (distal); proximal palp article without setae; the second article with two groups of 9 short setae in proximal part and 12 long setae distally; distal article narrowed, with 1 A group of 4 setae, 2 B setae, 21 D setae, 5 E setae. Maxilla 1 palp reduced, distal article with 9 apical and sub-apical long naked setae (both palps symmetrical); outer plate with 185 multi-toothed sickle-shaped spines; inner plate triangular with 35 plumose setae. Maxilla 2 inner plate slightly smaller than outer one with oblique row of 28 plumose setae; both of them apically with about 150 stiff setae in two rows. Maxilliped palp article 2 with about 80 setae along inner margin; article 4 (distal) with dorsal seta, bearing 5 setae at the nail base, nail twice shorter than pedestal; outer plate with 16 flattened spines, a group of 3 long plumose and 8 naked setae on apex; inner plate with 3 strong peg-spines, 11 stiff serrate and 3 naked setae on apex, 33 plumose setae on ventral face. Coxal plates, gills (figs 2A, 3A-D, 5A-E). Coxal plate 1 of rectangular shape, antero-ventral margin slightly narrowed with 13 setae along edge. Coxal plate 2 of rectangular shape, antero-ventral margin narrowed with 7 setae along edge. Coxal plate 3 width: depth is 0.5: 1; along antero-ventral margin 9 setae. Coxal plate 4 of sub-quadrate shape, width: depth is 0.8: 1; posteriorly with prominent excavation; along ventral margin 25 setae. Coxal plates 5–7 progressively smaller towards the posterior; coxal plates 5–6: anterior lobe well-developed bearing 1 seta each on ventral margin; posterior margin serrate with 4 or 5 setae. Coxal plate 7 semicircular with anterior lobe indistinct, along posterior margin 5 setae in shallow serration. Coxal gills 2–7 stalked, large but progressively smaller towards the posterior; gills 2–4 subtriangular; gills 5–7 saccular or irregularly ovoid; gill 7 smallest, stalk relatively long. Gnathopods 1 and 2 (figs 3A, B). Gnathopod 1, ischium with 4 postero-distal sets of setae. Carpus 0.4× length of propodus; anterior margin of carpus without setae; carpus posteriorly with transverse row of lateral and sub-marginal setae. Propodus almond-shaped, palm as long as posterior margin, slightly convex with cutting margin acanthaceous; along posterior margin 8 notched spines and 4 sets of simple setae; anterior margin with 2 pairs of setae, antero-distal group with 7 setae; palmar margin with short, notched setae along outer and inner faces and armed with row of 4 distally-notched, robust spines on outside (1 strong spine in the middle), palmar angle with 2 corner spines on inner face; nail 0.2× total length of dactylus, 1 seta along anterior margin, 1 short stiff seta at hinge. Gnathopod 2, basis width: length is 0.27: 1, bearing 1 serrate spine distally. Ischium with 3 sets of postero-distal setae. Carpus 0.37× length of basis and 0.42× length of propodus; anterior margin of carpus with 1 distal set of setae; carpus posteriorly with 7 lateral sets of setae. Propodus small (compared to the body) and 1.2× larger than propodus of gnathopod 1; propodus subtriangular, palm as long as posterior margin, beveled, slightly convex with cutting margin acanthaceous; posterior margin with 10 sets of simple setae; anterior margin with 4 sets of setae; antero-distal group with 7 setae; palmar margin with short, notched setae along outer and inner faces and armed with row of 9 distally-notched robust spines on outside (1 strong spine in the middle), palmar angle with 2 corner spine on inner face; dactylus similar to that of gnathopod 1. Pereopods 3–7 (figs 2A, 5A-E). Lengths of pereopods 3–4 sub-equal. Dactylus 4 0.32× propodus 4; nail length 0.37× total dactylus length. Dactyli 3–4 with dorsal plumose seta; inner margin with 1 stiff seta and 1 thin seta at hinge. Lengths of pereopods 5: 6: 7 is 1: 1.01: 0.95. Pereopod 7 length 0.48× body length. Bases 5–7 narrowed distally, length: width is 1: 0.58–0.68; posterior margins straight (in basis 5) or convex (distinctly in basis 7), without postero-distal lobes; posterior marginal serration with short setae; anteriorly 3–6 notched spines accompanied with short setae. Dactylus 7 length 0.2× propodus 7 length. Dactyli 5–7 with dorsal plumose seta; inner margin with 1 stiff seta and 1 thin seta at hinge. Pleopods and uropods (figs 2A, C-E, G-I). Pleopods 1–3 sub-equal, each with 2 coupling setae accompanied with 1–2 stiff setae; peduncular articles fringed with long, thin setae; proximal article of inner rami fringed with 4–5 plumose setae. Pleopods 1–3 rami with 16–20 articles each. Uropod 1 protopodite without basofacial spine, 4 dorso-lateral and 2 dorso-medial spines; exopodite as long as endopodite; rami straight with 1 or 2 spines along outer margins; both with 5 strong notched spines apically and sub-apically. Uropod 2 protopodite with 4 setae and 1 strong spine along dorso-medial margin; exopodite as long as endopodite. Uropod 3 protopodite with 3 strong notched spines on apex; endopodite 0.8× protopodite length, 5 sets of long simple setae along inner margin, 2 spines and 7 long setae apically; exopodite 1.8× longer than protopodite, with 4 groups of lateral spines accompanied with long setae, 8 sets of long simple setae along inner margin, 4 spines and 7 long setae apically.

Sexual dimorphism: Comparison based on 14.0 mm female, X45055 View Materials /Cr-1825-FEFU, sexually dimorphic characters (figs 2K, L, 3C, D). Body smaller and slender. Antenna 1 60% of total body length; antenna 2 short reaching 30% length of antenna 1. Gnathopod 1 smaller than gnathopod 2, propodi sub-rectangular; palmar margins sub-transverse, short and weakly armed with spines. Carpus of gnathopod 2 flexible, shorter than propodus. Pereopods 5–7: bases broader than those of male. Uropod 3 exopodite 1.5× longer than protopodite. Oostegites 2–5 on gnathopod 2 and pereopods 3–5.

Variability: The number of sickle-shaped spines on the outer plate of maxilla 1 varies from 180 to 198; other mouth parts and appendages have minor differences or quite indistinguishable.

Distribution and ecology: The amphipods Zenkevitchia karamani , sp. n. inhabits sandy and muddy bottoms with water temperature + 12–13 °C in cave-lakes Anatolia, Bezimjnnoe and Goluboe in Novy Afon cave; known only from type locality (fig. 1). Stygobiont crustacean Synurella sp. were collected from this same locality.

Etymology: Species named in honor of famous zoologist Acad. Gordan S. Karaman (Montenegrin Academy of Sciences and Arts, Podgorica) for his outstanding contribution to the amphipod systematics.

Taxonomic comments: Within the genus Zenkevitchia , Z. karamani sp. n. is clearly related to the admirabilis -group with ‗filtrative‘ outer plate of maxilla 1. The new species differs from other species of the group in the following characters: antenna 1 longer and reach 0.6x of body length; maxilla 1 outer plate with up to 200 spines; molar process without a seta; both gnathopods 1–2 in males with broadened and bevelled palmar margin (especially in gnathopod 2); a more detailed comparison of Z. karamani sp. n. is given in Table 1 View Table 1 .

Zenkevitchia karamani , sp. n. is an unique taxon that shares the features of several groups. Among the seven subterranean species of gammarid Amphipoda of the Caucasian region ( Anopogammarus birsteini Derzhavin, 1945 , Kruberia abchasica Sidorov, Samokhin , in press) in Gammaridae and ( Adaugammarus pilosus Sidorov et al., 2015 , Zenkevitchia admirabilis , Zenkevitchia sandroruffoi Sidorov et al., 2015 , Zenkevitchia revazi Birstein et Ljovuschkin, 1970 , Zenkevitchia yakovi Sidorov, 2015 ) in Typhlogammaridae , Z. karamani has a some distinct features: (1) palmar angle of gnathopods with small corner spines on inner face (this feature is also inherent to the following species A. birsteini , K. abchasica and A. pilosus ); (2) modified spine between lacinia and molar process (this feature is also inherent to K. abchasica ) (Sidorov, Samokhin, in press).

V

Royal British Columbia Museum - Herbarium

R

Departamento de Geologia, Universidad de Chile

GBIF Dataset (for parent article) Darwin Core Archive (for parent article) View in SIBiLS Plain XML RDF